|
. Replacement Fender
REPLACEMENT FENDER Restores original look and integrity Easy, do-it-yourself, bolt-on installation using original mounting hardware Shaped and contoured to replace original perfectly! Eliminates rusted, dented or cracked part easily. Die-formed steel with all correct body lines, light holes, cutouts, mounting holes, etc. Primer-painted to fight rust. Some surface prep required before painting. NOTE: SKU numbers ending in E are freight shipped from our warehouse by truck. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. NOTE: SKU numbers ending in FE are factory shipped by freight truck.
Retail Price: $82.18
Our Price: $82.18
|
|
1/2" Drive Dual-Scale Torque Wrench
1/2" DRIVE DUAL-SCALE TORQUE WRENCH Range: 10-150 ft.-lbs. and 1.4-20.7 m.-kgs. Approximately 18-1/2"L With hang-up hook. Wrench sets torque in clockwise movement. Reversible ratcheting action. Micrometer-style adjustments; lock holds torque setting. Nickel-chromed steel body?smooth ball-bearing action. Wrench clicks when you reach desired pre-set torque. With complete instructions and additional conversion tables and formulas.
Retail Price: $30.99
Our Price: $30.99
|
|
1/2-Amp Motorcycle Battery Chargers
1/2-AMP MOTORCYCLE BATTERY CHARGERS Small 2" x 2-1/2" x 1-1/2" module stores under seat Available with permanently attachable leads or alligator clips, 12-volts or 6-volts Chargers allow recharging or trickle charging without removing battery Plugs into any 110- to 120-volt outlet. 6-ft. quick connect/disconnect cable included. UL listed.
Retail Price: $19.99
Our Price: $19.99
|
|
10-Gallon Portable Pressurized Abrasive Blaster
10-GALLON PORTABLE PRESSURIZED ABRASIVE BLASTER Holds 50-lbs. of sand or other abrasives Deliver abrasive at higher pressure than siphon-fed blasters to quickly remove rust, scale and carbon Approximately 14-1/2"W x 34"H x 21"D Cost-efficient professional sandblasting at it\'s best! Ideal for body, paint and welding shops. Kits include approx. 9-1/2 ft. abrasive hose with lever-control shut-off valve attached to handle. 3/8" NPT air inlet. Minimum 3/8" ID air hose recommended. Air consumption at 60- to 125-psi: 6-25 cfm. Pkg. of 3 replacement ceramic nozzles \(sizes 3/32", 7/64", 1/8" or 9/64"\) available separately. Cannot be shipped express.
Retail Price: $198.99
Our Price: $198.99
|
|
10-Gallon Stainless Steel Wet-Dry Vacuum
10 Gallon Stainless Steel Vacuum10 gallon stainless steel container6.0 peak HP motorSwiveling front casters provide ease of movement in any directionPositive lock on hose system eliminates unexpected disconnections. High performance cartridge filter for wet or dry pick up. 18\' power cord with cord wrap design. Accessory holder keep all accessories organized. Accessories include flexible hose, two extension wands, crevice nozzle, utility nozzle, floor brush and dust bag.
Retail Price: $93.99
Our Price: $93.99
|
|
1000-Pc. Wire Terminal Kit
1,000-PC. WIRING TERMINAL CENTER Make strong solder-less connections quickly Exceeds UL or SAE safety standards Our biggest terminal center-;for automotive, marine, home, electronic. All terminals except high-temperature and female disconnects are pure copper with electro-tin plating. High-temperature terminals are nickel-plated steel to withstand extreme heat. Female disconnects are brass. Kit includes both insulated and non-insulated terminals. Insulated types eliminate taping and are color coded for quick identification of wire size. Included pieces: 435 Ring terminals. For permanent connections. Non-insulated terminals for 22-18 gauge wire \(stud sizes #4, 6, 8, 10 and 1/4"\) and 16-14 gauge wire \(sizes #4, 6, 8, 10 and 1/4" and 5/16"\). Insulated terminals for 22-18 and 16-14 gauge wire \(sizes #6, 8, 10\) and 12-10 gauge wire \(size #10\). Also includes non-insulated high-temperature terminals for household use in places with excessive heat \(up to 900 degrees F\). For 16-14 gauge wire \(#6, 8\). 235 Spade terminals. For connection without removing screw or nut. Includes non-insulated and insulated terminals for 22-18 and 16-14 gauge wire \(sizes #6, 8, 10\) and insulated terminals for 12-10 gauge wire \(size #10\). 155 Disconnects. Plug-ins for fast connection and disconnection. With piggyback connectors. Includes non-insulated disconnects for 22-18 gauge wire \(female with .110", .187" and .250" tab widths, male with .250" tab width\) and 16-14 gauge wire \(.187" and.250" female, .250" male\). Insulated disconnects for 22-18 and 16-14 gauge wire \(.187" and .250" female, .250" male\). Twenty .250" adapters. Non-insulated. 3 types. Male tab adapters to adapt standard screws to male disconnects. Piggyback adapters split one wire into two. Fuse taps allow quick take-off from auto fuse blocks for adding accessories. 29 In-line butt connectors. Insulated. For joining wires without soldering or taping. Includes connectors for 22-18, 16-14, 12-10 gauge wire. 11 Bullets and receptacles, pigtails and line taps. Bullets and receptacles slice wires for fast connection and disconnection. For 16-14 gauge wire. Insulated. Closed-end pigtails permanently joining multiple wires. Nylon insulated cap ensures trouble-free, fully insulated dead-end splices. For 16-14 gauge wire. Quick-splice and taps take off an extra hot line quickly without stripping wires. Fast hook-up for auto radios, CBs, trailer lights. Also for house wiring. For 18-14 gauge wire. 15 Twist-on wire nuts. For 22-18, 20-16 and 22-14 gauge wire. 36 Cable ties. 3-1/2" long. 18 Grommets. Protect wire through metal panels. Sizes: 1/4" hole, 1/8" I.D., 5/16" hold, 3/16" I.D., 3/8" hold, 1/4" I.D. 40 Nylon cable clamps. Safely mount wires and wire bundles away from excessive heat and moving parts. Includes 1/8", 3/16", 1/4" and 1/2" diam. clamps. 6 Test clips. With mounting screw. Includes 1" and 2" lengths for 22-12 gauge wire. Organizer/storage box. Compartmentalized clear high-impact plastic box has hinged lid. Approx. 8" x 13" x 2" H. Deluxe crimper/wiring pliers also available; special price if purchased with terminal center.
Retail Price: $55.99
Our Price: $55.99
|
|
104+ 104+ Maximum Octane Boost
104+ MAXIMUM OCTANE BOOST Maximizes power, gas mileage and acceleration Cleans fuel injectors and the complete fuel system Reduces knocks, pings and hesitation Improved formation with DOUBLE THE OCTANE BOOST of our regular formula. Safe for catalytic converters and oxygen sensors. 16-oz. bottle.
Retail Price: $11.99
Our Price: $11.99
|
|
104+ Octane Boost
104+ OCTANE BOOST Boosts power and performance Improves gas mileage Cleans fuel injectors and the entire fuel system Reduces knocks, pings and hesitationSafe for catalytic converters and oxygen sensors. 16-oz. bottle.
Retail Price: $8.49
Our Price: $8.49
|
|
12-Volt Cigarette Lighter
12-VOLT CIGARETTE LIGHTER Mounts in or under dash Kit includes chromed metal parts and under-dash mounting bracket Automatic pop-out
Retail Price: $8.49
Our Price: $8.49
|
|
12-Volt Electric Blanket
12-VOLT ELECTRIC BLANKET WITH TIMER We sold thousands of this popular blanket last year Now it\'s been improved! It\'s got a timer, so it won\'t kill your battery! It keeps you warm and cozy when temperatures drop, but the timer automatically shuts off the heat after 30 or 45 minutes \(you choose\) to prevent battery drain...just in case you forget. Cotton/poly fleece blanket measures 42"W x 58"L and it comes with 7-ft. cord.
Retail Price: $31.99
Our Price: $31.99
|
|
12-Volt Impact Wrench Kit
12-VOLT IMPACT WRENCH KIT Reversible 1/2" drive wrenches loosen and tighten lug nuts in seconds-;perfect for roadside emergencies! Delivers up to 150-ft./lbs. of torque-;changing a tire has never been easier! Also great for shop jobs-;rotating tires, inspecting brakes, removing bolts, etc. Plugs into cigarette lighter socket. Unique torque action allows 12-volt impact wrench to generate the torque and power of an air-powered wrench! Motor spins until it reaches maximum speed, then the internal clutch automatically engages and the nut is tightened/loosened. Industrial-grade plastic housing. Easy-grip handle with trigger switch. Weighs less than 5-lbs. Includes 13-ft. power cord with light plug, sockets to fit all sizes of lug nuts, molded plastic carrying case and instructions.
Retail Price: $65.99
Our Price: $65.99
|
|
12-Volt Power Outlet With Switch
12-VOLT POWER OUTLET WITH SWITCH For vans and RVs Screws, solderless connectors and instructions included Accepts standard 12-volt plug for accessories Black aluminum housing. 2-3/4"W x 3-1/2"L.
Retail Price: $17.99
Our Price: $17.99
|
|
12V Fluted Sealed Beams
12V FLUTED SEALED BEAMS Single beam lamps are designed to use with Spotlight Housing \(sold separately, ZX064689\) Come with fluted lens for a broad light pattern. Use screw type connectors. Check local laws regarding legality of colored sealed beams.
Retail Price: $17.99
Our Price: $17.99
|
|
12V Nonfluted Sealed Beams
12V NONFLUTED SEALED BEAMS Single beam lamps are designed to use with Spotlight Housing \(sold separately, ZX064689\) Come with nonfluted lens for a narrow pattern. Use screw type connectors. Check local laws regarding legality of colored sealed beams.
Retail Price: $12.99
Our Price: $12.99
|
|
2-Arm Heavy-Duty 4-Piece Gear Puller Set
2-ARM HEAVY-DUTY 4-PIECE GEAR PULLER SET Includes: 3", 4", 6" and 8" pullers Grip tightly...won\'t slip. Pull gears, sprockets, bearings and pulleys effortlessly and safely. Polished jaws and arms are forged and machined from quality alloy steel, precision heat treated for maximum durability and strength. Hardened steel center bolt with hex head for sure-grip wrench fit. Jaws can be reversed to grip firmly inside or outside gears or parts. Sets includes these pullers: 3" \(approx. 2-1/2" reach\), 4" \(approx. 3-1/2" reach\), 6" \(approx. 4-3/4" reach\) and 8" \(approx. 7-1/2" reach\). 4" through 8" pullers have lower centering cap on bottom of bolt to assure constant, even pressure. 8" puller has 2-hole adjustable jaws.
Retail Price: $35.99
Our Price: $35.99
|
|
2-Arm Heavy-Duty Gear Pullers
2-ARM HEAVY-DUTY GEAR PULLERS Available in 5 sizes: 3", 4", 6", 8" and 12" Grip tightly?won\'t slip. Pull gears, sprockets, bearings and pulleys effortlessly and safely. Polished jaws and arms are forged and machined from quality alloy steel, precision heat treated for maximum durability and strength. Hardened steel center bolt with hex head for sure-grip wrench fit. Jaws can be reversed to grip firmly inside or outside gears or parts.
Retail Price: $8.49
Our Price: $8.49
|
|
20-Gallon Portable Pressurized Abrasive Blaster
20-GALLON PORTABLE PRESSURIZED ABRASIVE BLASTER Holds 100-lbs. of abrasives Deliver abrasive at higher pressure than siphon-fed blasters to quickly remove rust, scale and carbon Approximately 15-1/2"W x 37-1/2"H x 27-1/2"D Cost-efficient professional sandblasting at it\'s best! Ideal for body, paint and welding shops. Kit includes approx. 9-1/2 ft. abrasive hose with lever-control shut-off valve attached to handle. 3/8" NPT air inlet. Minimum 3/8" ID air hose recommended. Air consumption at 60- to 125-psi: 6-25 cfm. Pkg. of 3 replacement ceramic nozzles \(sizes 3/32", 7/64", 1/8" or 9/64"\) available separately. Cannot be shipped express.
Retail Price: $240.99
Our Price: $240.99
|
|
200-Pc. R134A Freon A/C O-Ring Kit
200-PIECE R134A FREON A/C O-RING KIT12 sizes \(1/16" to 3/32" thick\) to service all R134a air conditioning systemsThe O-ring compound is a special green material formulated to withstand the lubricating oils, pressure and temperatures common to the R134a A/C systems.
Retail Price: $26.99
Our Price: $26.99
|
|
226-Pc. Double Seal O-Ring Kit
226-PIECE DOUBLE-SEAL O-RING KITMade of #70 Durometer nitrite36 sizes from 7/32"OD to 1-9/16"ODFour sealing surfaces for the best sealing possible!Upgraded O-rings replace all standard O-rings.
Retail Price: $28.99
Our Price: $28.99
|
|
3-Way Custom-Fit Overhead Sound Bar
CUSTOM-FIT OVERHEAD SOUND BAR The no-hassle way to add 6 speakers and greater listening pleasure to your Wrangler Speakers are positioned at ear level yet they\'re out of the way-;won\'t interfere with riding comfort or storage space For Jeep Wranglers This 3-way system includes 2 bass drivers, 2 midranges and 2 tweeters. Speakers handle up to 200 Watts of peak music power. Bar mounts directly to roll bar. Some drilling required. Covered in long-lasting, weather-resistant leather-grained black vinyl. The 6" bass drivers feature durable mica cone and butyl rubber surround, 1" heat-resistant voice coil and 10-oz. magnet; 2-1/2" high-compliance midranges, 1" tweeters with neodymium magnet and ferrofluid-cooled voice coil for superior sound dispersion and greatest operating efficiency. 4-Ohm impedance. Frequency response: 50 to 22,000 Hz.
Retail Price: $169.99
Our Price: $169.99
|
|
3/8" Drive Dual-Scale Torque Wrench
3/8" DRIVE DUAL-SCALE TORQUE WRENCH Features standard and metric calibrations. Range: 120-960 inch-lbs, 1.4-11.1 meters-kilograms Approximately 10-1/2"L Wrench sets torque in clockwise movement. Reversible ratcheting action. Micrometer-style adjustments; lock holds torque setting. Nickel-chromed steel body...;smooth ball-bearing action. Wrench clicks when you reach desired pre-set torque. With complete instructions and additional conversion tables and formulas.
Retail Price: $26.99
Our Price: $26.99
|
|
30-Piece Head-Sealed Connector Refill Kit
HEAT-SEALED CONNECTOR KITS Essential for outdoor, under-hood or under-car connections! Heat sealing forms a weather-tight, waterproof connection! Kits include 3 sizes of butt connectors to fit all splicing wire \(22- to 10-gauge\). Lock out the weather and moisture when splicing wire! Simply crimp connector to splice the 2 wires together, then heat special protective covering with match or lighter. Covering will shrink around wire and connector to form strong, water/weather-tight seal. Great for automotive wiring \(trailer hitch, fog/driving lights, under-car hookups\), electronic work, outdoor lighting around home, etc.
Retail Price: $18.99
Our Price: $18.99
|
|
303 Products Aerospace Protectant
AEROSPACE PROTECTANTOffers 100% prevention of UV-caused slow fadeHelps to restore lost color and lusterIt\';s like sunscreen for your vinyl, gelcoat, fiberglass, rubber, plastics and leather areas. Not oily/greasy and repels dust, resists soils and stains. Aerospace Protectant from 303 will keep your vehicle looking showroom new year after year.
Retail Price: $11.99
Our Price: $11.99
|
|
303 Products Cleaners & Spot Removers
CLEANER & SPOT REMOVERCan be used on carpet and upholstery in your auto, home, boat or RVLifts and suspends oil, grease and dirt that can then be easily wiped away303 Cleaner & Spot Remover is safe for all water-safe materials. Non-hazardous, toxic and is biodegradable/odorless.
Retail Price: $11.99
Our Price: $11.99
|
|
303 Products Convertible Top Cleaning & Care Kits
CONVERTIBLE TOP CLEANING & CARE KITS All-inclusive kits for vinyl and fabric tops Each contains a cleaner and protective treatmentInstructions for proper care included.
Retail Price: $36.99
Our Price: $36.99
|
|
303 Products High Tech Fabric Guard Spray
HIGH TECH FABRIC GUARD SPRAY Protects against soiling & stains, for exterior and interior use First quality, mfg reccommended products that are reasonably priced Offer unbeatable protection for all textiles, non-toxic & odorless when dry Keeps carpets, upholstery clean and stain free
Retail Price: $19.99
Our Price: $19.99
|
|
303 Products Tonneau & Convertible Top Cleaners
TONNEAU & CONVERTIBLE TOP CLEANERSpecially designed for fabric convertible tops and automotive vinyl used in convertible tops, SUV soft tops, tonneaus covers and car brasRemoves soils/stains and rinses residue freeNon-toxic and biodegradable Note: This is not a soap/detergent and does not contain petroleum solvents, bleach or abrasives.
Retail Price: $11.99
Our Price: $11.99
|
|
37" Snow Brush/Ice Scraper
37" SNOW BRUSH/ICE SCRAPER Lightweight aluminum and plastic construction Long-wearing nylon brush bristles Compact-stores easily in trunk or cargo area of any vehicle Brush snow off of vehicle or windshield easily. Heavy-duty ice scraper makes quick work of frozen snow. Large-diameter shaft for easy-grip handling.
Retail Price: $17.99
Our Price: $17.99
|
|
39" Wide Handlebars
39" WIDE HANDLEBARS Chrome-plated, bent steel tubing with slight 4" rise and 9" pullback Extra wide for extra style and extra sparkle! Complete with dimples for easy control installation Mounts to 1" clamps \(not included\).
Retail Price: $53.99
Our Price: $53.99
|
|
3dCarbon 3-Pc Duck Tail Spoiler
3-PC. DUCK TAIL SPOILERHigh pressure polyurethane construction Looks great with other 3dCarbon "Boy Racer" accessories!Add some attitude to your Mustang! Attaches to the deck lid and quarter panels. No screws or hole drilling is required. The spoiler attaches with OE approved 3M double faced tape. 3-pc. spoiler can be installed on Mustangs with the factory GT spoiler. The width of the 3-pc. spoiler from front to rear is enough to cover the 4-holes from the factory spoiler. Spoiler will require prepping-priming and painting prior to installation.
Retail Price: $374.99
Our Price: $374.99
|
|
3dCarbon 3D Carbon Body Styling Kit For Toyota Prius
FIVE AXIS DESIGN 4-PIECE AERO STYLING KIT The Five Axis Design Toyota Prius aero styling kit helps maintain the Prius\' remarkable 0.25 coefficient of drag, while also enhancing downforce and curb appeal. The aero styling kit was developed with both form and function in mind to build upon the advancements in hybrid technology, which Five Axis Design supports as a major component of the automotive industry\'s future. Manufactured with polyurethane materials.
Retail Price: $999.99
Our Price: $999.99
|
|
3dCarbon 3D Carbon Mustang Hood Scoop
MUSTANG HOOD SCOOP Hood scoop is easily installed in under 1 hour with double-sided tape no drilling or holes required Bold styling with a tight, flush fitHood scoop is manufactured in high-pressure injected polyurethane Includes Polyurethane Domed Mesh decal for front of hood scoop
Retail Price: $170.99
Our Price: $170.99
|
|
3dCarbon 3Dcarbon Mustang Convertible Tonneau Cover
3dCARBON MUSTANG CONVERTIBLE TONNEAU COVEROne piece design for a tight, flush fitInstalls with supplied locking brackets - drilling requiredManufactured in vacuum formed 1 piece ABS Plastic with light texture-matching factory moldingsBacked by 3dCarbon\'s factory matching warrantyCDC Light Bar Compatible3dCarbon recommends 2 people fo installation
Retail Price: $449.99
Our Price: $449.99
|
|
3dCarbon 3Dcarbon Mustang Headlight Splitters
3dCARBON MUSTANG HEADLIGHT SPLITTERSAggressive styling with a tight, flush fitInstalled with double sided tape - no drilling requiredManufactured in high-pressure injected polyurethaneBacked by 3dCarbon\'s factory matching warranty
Retail Price: $99.99
Our Price: $99.99
|
|
3dCarbon 3Dcarbon Mustang Side Quarter Panel Scoops
3dCARBON MUSTANG SIDE QUARTER PANEL SCOOPSBold styling with a tight, flush fitEasily installed with double-sided tapeNo drilling is required for installationManufactured in high-pressure injected polyurethaneBacked by 3dCarbon\'s factory matching warrantyAvailable pre-painted in all Ford factory colors to OEM paint spec standardsIncludes polyurethane domed mesh decal for side scoop insert
Retail Price: $169.99
Our Price: $169.99
|
|
3dCarbon Bumper Replacement Body Kits
BUMPER REPLACEMENT BODY KITAn exciting new look for your Mustang!Easy to installAdd on to your "Boy Racer" Kit with other, additional 3dCarbon "Boy Racer" accessories!Kit replaces factory OE bumpers. The front and rear bumper replacements are pre-drilled making installation easy by utilizing the original factory bumper attachment points and hardware. The side marker lights are the original lights from the OE bumpers. The front bumper features a pre-installed, aluminum mesh grille with unique Mustang diamond pattern and 2 vertical support bar. Installation on V6 models will require the GT front grille and lights. The 3dCarbon "Boy Racer" side skirts, door caps, and fender flares come pre-taped with 3M double faced tape for hassle-free installation. The flares extend the fenders approximately 3/4" over the tires. The door caps attach in the wheel wells with 2 screws on each end and double faced tape on the back against the fenders and rear quarter panel. Kit requires minimal prepping for painting prior to installation. Shipped separately from factory. NOTE: SKU numbers ending in FE are factory shipped by truck freight.
Retail Price: $1671.99
Our Price: $1671.99
|
|
3dCarbon Cc Rear Deck Lid Spoiler
3D CARBON CC REAR DECK LID SPOILERAerodynamic styling with a tight, flush fitManufactured in high-pressure injected polyurethaneComes complete with easy to follow instructions for quick installation
Retail Price: $179.99
Our Price: $179.99
|
|
3dCarbon Custom Fit Polyurethane Mustang Spoiler
CUSTOM-FIT POLYURETHANE MUSTANG SPOILERThe new 3dCarbon rear spoiler is a great addition to create an aggressive, aerodynamic appearanceAerodynamic styling with a tight, flush fitManufactured in high-pressure injected polyurethaneComes complete with easy to follow instructions for quick installationAvailable pre-painted in all factory matching colors
Retail Price: $179.99
Our Price: $179.99
|
|
3dCarbon Factory Style Wing
FACTORY STYLE WINGInstall a new wing or replace your factory-installed spoiler Blow molded ABS PlasticLooks great with other 3dCarbon "Boy Racer" accessories!Add some attitude to your Mustang! Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you.
Retail Price: $167.99
Our Price: $167.99
|
|
3dCarbon Ford Mustang Gt Side Skirts
SIDE SKIRTFlexible high-pressure polyurethane side skirtAttaches to side of vehicle with screws in the wheel wells and OE approved 3M double face tape against the bodyRequires prepping, priming and painting prior to installationFront Air Dam Bumper \(ZX274434F\) and Rear Bumper Lower Skirt Attachments \(ZX274437F\) sold separately. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you.
Retail Price: $184.99
Our Price: $184.99
|
|
3dCarbon Front Air Dam Bumper Attachment
FRONT AIR DAM BUMPER ATTACHMENTAttachment made of high-pressure polyurethaneRequires prepping, priming and painting prior to installationAttaches directly to factory bumper with screws in the wheel wells and OE approved 3M double face tape around the perimeterKit includes adhesive, screws and instructions. Rear Bumper Lower Skirt Attachment \(item # ZX274437\), Right Side Skirt \(item # ZX274435\) and Left Side Skirt \(item # ZX274436\) sold separately. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you.
Retail Price: $239.99
Our Price: $239.99
|
|
3dCarbon Hood Scoop
HOOD SCOOPHigh pressure polyurethane construction Installs easily with 3M double faced tapeLooks great with other 3dCarbon "Boy Racer" accessories!Add some attitude to your Mustang! Scoop location is 6.5" forward of the rear edge of the hood-just forward of the windshield squirter nozzles. Included are pre-cut vinyl decals for the front recessed scoop inlets.
Retail Price: $282.99
Our Price: $282.99
|
|
3dCarbon Mustang Gt 4-Pc. Body Kit
4-PIECE BODY KITMade of high-pressure polyurethaneRequires prepping, priming and painting prior to installationAttaches directly to vehicle with screws in the wheel wells and OE approved 3M double face tape against the bodyKit includes front air dam and rear bumper lower skirt attachments; right and left side skirts. Give appearance of lowering vehicle by about 2". Blackened area on rear lower skirt is painted black for added effect. Rear lower exhaust opening in rear lower skirt is designed to accommodate factory exhaust pipe. If an aftermarket exhaust system is installed the tip needs to be fitted to the factory pipe location. Kit includes adhesive, screws, promoter and instructions. NOTE: SKU numbers ending in FE are factory shipped by truck freight.
Retail Price: $835.99
Our Price: $835.99
|
|
3dCarbon Mustang Window Louvers
2010 Mustang Window Louvers3dCarbon is proud to introduce an all new accessory to their 2010 Mustang product line. These all new window louvers feature 3dCarbon\'s aggressive styling and tight, flush fit. They fit the 2010 GT and V6 Mustang only. The louvers are easily installed with OE-approved double sided tape - no drilling is required. They also come with integrated dome gel decals with mesh grille designThe louvers are manufactured in high-pressure injected molded polyurethane.They are also backed by 3dCarbon\'s factory matching warranty.
Retail Price: $160.99
Our Price: $160.99
|
|
3dCarbon Rear Bumper Lower Skirt Attachment
REAR BUMPER LOWER SKIRT ATTACHMENTHigh-pressure polyurethane rear skirtAttaches directly to factory bumper with screws in the wheel wells and OE approved 3M double face tape around the perimeterRequires prepping, priming and painting prior to installationBlackened area is painted black for added effect. Rear lower exhaust opening is designed to accommodate factory exhaust pipe. If an aftermarket exhaust system is installed the tip needs to be fitted to the factory pipe location. Kit includes adhesive, screws, promoter and instructions. Front Air Dam Bumper Attachment \(item # ZX274434\) Right Side Skirt \(item # ZX274435\) and Left Side Skirt \(item # ZX274436\) sold separately. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you.
Retail Price: $261.99
Our Price: $261.99
|
|
3dCarbon Rear Tail Light Blackout Panel
REAR TAIL LIGHT BLACKOUT PANELHigh pressure polyurethane construction Installs easily with 3M double faced tapeAdd some attitude to your Mustang! Rear Tail Light Blackout Panel attaches to the body between the rear taillights and around the simulated gas cap. No screws or hole drilling is required. The panel attaches with 3M Double Face Tape. The panel is shipped in the natural color of the polyurethane "black" and requires prepping and painting prior to installation.
Retail Price: $146.99
Our Price: $146.99
|
|
3dCarbon Rear Window "U" Shape Window Trim
REAR WINDOW "U" SHAPE WINDOW TRIMHigh pressure polyurethane construction Installs easily with 3M double faced tapeAdd some attitude to your Mustang! No screws or hole drilling is required. The U Trim attaches to the rear glass directly over the blacked out Dot Matrix pattern on the rear glass. The U Trim requires prepping-priming and painting prior to installation.
Retail Price: $219.99
Our Price: $219.99
|
|
4-Pole Connectors With Circuit Testers
4-POLE CONNECTORS WITH CIRCUIT TESTERS Plugs into and upgrades vehicle\'s existing 4-pole tow plug Detects faulty wiring and incorrect connectionsEnsures that the vehicle\'s towing circuit is working properly LEDs instantly let you know whether power is reaching the trailerSaves time finding the source of trailer light problems. Eliminates guesswork, troubleshooting -- you\'ll KNOW which of the circuits are and which are not working. Plugs in between the tow vehicle\'s plug and the trailer\'s plug.
Retail Price: $11.99
Our Price: $11.99
|
previous « 1 2 3 4 5 6 7 8 9 10 ... 325 » next
|
